What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm Friday 8am - 5pm Saturday 9am - 12pm

Precision Pools and Spas

Home
United States
Sandy, UT
Precision Pools and Spas

Call Directions Website

Precision is a full service pool and spa company, we do new construction, remodels, plastering, serv

With over 20 years of experience, Precision Pools and Spas is the premier swimming pool and spa builder and contractor serving the greater Salt Lake City area and throughout Utah. You can always rely on Precision for a variety of your pool's needs. We provide quality and prompt pool equipment service and repair. If you need someone to care for your pool so it is clean and ready to use we provide a weekly cleaning service. Precision can also assist you with your pool equipment, supplies, and chemical needs. At Precision Pools and Spas we have our own pool plastering division. They specialize in remodeling your existing swimming pool by installing new plaster, tile, coping, and decking. Updating these key factors will make your pool or spa look stunning once again, even better than when it was brand new.

10/30/2026

Your backyard deserves a better soundtrack.

An overflow feature brings movement, the sound of flowing water, and a beautiful focal point to the pool.

Planning a new pool or refreshing your current one? Let’s talk about the details you’ll enjoy every day.

10/23/2026

A pool with a view? Just wait for this one.

A little sneak peek at a project taking shape in an absolutely stunning setting. Between the fall colors, mountain backdrop, and lake views, it’s hard to imagine a better place for a swim.

For now, our crew is putting in the work that will bring it all together. Follow along—we can’t wait to share more.

#𝐖𝐨𝐫𝐤𝐈𝐧𝐏𝐫𝐨𝐠𝐫𝐞𝐬𝐬

10/07/2026

This is where a pool starts to take shape.

Gunite is pneumatically applied to build the structural shell of the pool- but shooting is only part of the process. As the material goes in, our crew works it by hand, cutting and shaping the walls, steps, benches and transitions to bring the design to life.

It's messy, physical, precise work- and once the gunite is in, what started as an excavation finally starts looking like a pool. Can't wait to show off the finished build!

Built by hand, built to last.

Utah's custom gunite pool builder since 1997- Precision Pools & Spas.

09/30/2026

Some pools are designed to look good from every angle — even straight down.

Clean symmetry and the right lighting bring this entire space together. From the pool and decking to the surrounding landscape, every element feels like it belongs exactly where it is.

A great pool doesn’t just fill a backyard. It becomes a part of the overall aesthetic of the home.

Precision Pools & Spas | Building Utah pools since 1997

09/18/2026

A remodel is about more than making an old pool look new.

This pool came to us with aged, yellowing plaster, surface pitting, damaged coping, and flooded lights. Once work got underway, we uncovered conditions that made this remodel more involved than we initially anticipated.

Projects like this don’t always go exactly according to plan. Existing conditions can reveal challenges that aren’t visible until demolition begins, and this one required some extra time, preparation, and problem-solving along the way.

But that makes it even better to see everything coming together.

From removing deteriorated materials and properly preparing the existing shell to installing new finishes, tile, coping, and fixtures, every step has been about getting this pool back where it needs to be.

09/15/2026

This is what 40,000 PSI of water does to old plaster.

Before a pool can receive a new finish, the existing surface has to be properly prepared. Hydroblasting uses ultra-high-pressure water to remove old, deteriorated plaster and expose a clean, sound surface underneath.

Why go through all of this?

Because a new finish is only as good as the surface it’s bonded to. Leaving behind weak or compromised material can create problems with adhesion and shorten the life of the new finish.

It’s one of the messier stages of a pool remodel— but also one of the most important.

Good plaster starts long before the new plaster goes in.

09/08/2026

Shooting the gunite shell is only the beginning of the curing process.

Once the shell is in place, we use sprinklers to keep the gunite moist. Concrete doesn’t gain strength simply by “drying”—it gains strength through a chemical reaction called hydration, where the cement reacts with water and forms the compounds that bind the concrete together.

If the surface loses moisture too quickly, that hydration process can be disrupted and the shell can become more susceptible to shrinkage cracking and reduced surface durability.

Keeping the gunite consistently damp during the early stages of curing helps control moisture loss and supports proper strength development throughout the shell.

It may look like we’re just watering concrete, but it’s an important part of building a pool correctly from the start.

09/03/2026

Days 17–18 | The vision is starting to come together.

New tile is going in, coping is being cut and set, and the details that will define the finished pool are beginning to take shape.

There’s still work ahead, but this is the stage where the transformation becomes much easier to see — one tile and one piece at a time.

Follow along as we continue bringing this pool back to life.

08/31/2026

We’re proud to share that Precision Pools & Spas has been recognized by Construction Business Review as a Top Building & Swimming Pool Contractor of 2026!

This recognition is a reflection of the people behind every project—from our crews in the field to our team behind the scenes—and the standard of craftsmanship and service they work to deliver every day.

A big thank you to our team, our partners, and especially our customers who continue to trust us with their homes and projects.

We’re honored by the recognition and excited to keep building on what we’ve accomplished.

Here’s to another great year at Precision.

Address

426 W Universal Circle
Sandy, UT
84047

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm
Friday	8am - 5pm
Saturday	9am - 12pm

Telephone

+18016852212

Website

http://www.precisionpools.io/, http://thefaceofutah.com/precision-pools-and-spas, http://constructionbusinessreview.com/

Alerts

Be the first to know and let us send you an email when Precision Pools and Spas posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.