What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

Decks Rx LLC

Call Directions Website Contact the business

Constantly striving to grow and dial our process in.

10/30/2026

How we find the seat cut on CleanStairs stringers. 📐

Set the square on the second-to-last layout mark (the last mark is the plumb cut at the very bottom). Burn 4-1/2" straight up off the square, then mark the rise for that stair set. That's your seat cut, done the same way every time.

No guessing at the bottom of the stringer, and no stair that rocks on the pad.

📤 Send this to the guy who always fights the bottom cut.
💬 Comment CLEANSTAIRS and I'll get you the builder guide.

Stair stringer layout | Deck stairs | Gig Harbor deck builder | Decks Rx

10/30/2026

Two guys. One tread line. Zero exposed ends. 🔥

James McLaughlin sets each tread assembly onto a TA9Z bracket while Chris Maddox keeps them coming. It all gets locked down and wrapped in AZEK, and you won't find one raw tread end on the whole composite stair.

This is CleanStairs, our system for building composite deck stairs. We didn't invent the bracket-and-block design, but we systemized it and wrapped it so a crew can flow like this.

📤 Send this to the guy on your crew who's still notching stringers.
💬 Comment CLEANSTAIRS and I'll get you the builder guide.

Gig Harbor deck builder | Decks Rx

FastenMaster AZEK Building Products

10/29/2026

Toss it. Line it up. Every hole hits. 🎯

These TA9Z brackets drop right onto precision-drilled pilot holes, so there's no guessing and no wandering screws. Every bracket gets locked down with 2-1/2" SDS screws, and every one sits dead-on.

We didn't invent the block-tread design. We systemized it so it comes out this clean every time.

Comment CLEANSTAIRS and I'll get you the builder guide. 📘

10/29/2026

Almost 20 feet of CleanStairs stringers. 😳

Solid stringers, wrapped and ready to go. When the stairs are this long there's no room for guesswork, so every rise and run gets laid out exactly before the first cut.

We didn't invent the block-tread design, but we've systemized it, and the builder manual is almost done.

💾 Save this for your next big stair job.
📩 Send it to the builder who's never set a stringer this long.
💬 Comment CLEANSTAIRS to get on the list for the builder guide.

10/27/2026

Your calculator is lying to you. 🧮

Rise, run, then the diagonal. That diagonal (the hypotenuse) is your layout. Say it reads 13 3/8". Don't type in 13 3/8 and hit plus equals. Do the math and let the calculator carry the answer forward.

That 3/8" is rounded. The real number could be a 64th or a 32nd either way. Retype the rounded number and you lose that bit, and over a whole run of steps you end up 3/8" off at the bottom.

This works for traditional hand-cut stringers too. Run the diagonal, line your rise up with it every time, mark it, and cut it. You're not at the mercy of every knot tipping and leaning your square.

💾 Save this before your next stair layout.
💬 Square or calculator? Tell us how you lay out your stringers.

10/27/2026

Big love to Jeremiah Coffey makes me happy seeing him not only pushing the sytems he help create, at Decks Rx, but doing it under his own Brand!

10/24/2026

Most guys eyeball their herringbone layout. We do the math. 🧮

Watch the screen: Construction Master Pro, punch in rise, punch in run, hit Diag. That's your diagonal before the first board goes down. Nail that line and the whole herringbone falls into place.

Square layout, tight joints, no surprises at the end of the run. That's how we set it up for success.

💾 Save this for your next layout.
💬 Calculator or framing square? How do you lay out your diagonals?

10/24/2026

CleanStair sytem in play! Nicely done

10/23/2026

You don't need two colors to get contrast. 👀

The embossing on AZEK boards catches the light and throws a shadow across the deck, so one color shows real depth and texture. That's a clean, custom look without a two-tone layout.

One board, one color, and plenty of contrast. That's the Decks Rx way.

Thinking about a new deck? Send us a message for a free estimate.

AZEK Building Products

10/23/2026

Found some CleanStairs on a bid today 👀 Solid block treads sitting on Simpson TA9Z brackets, the same design we build. These are just older, painted, and never wrapped.

Here's the thing. You can see treated lumber peeking through in the back, so my guess is these are second-gen stairs. That means the original hand-cut stringers already failed before the deck did, and this set replaced them. If they're original, they're still going to outlast this deck, because the deck is failing and the stairs are rock solid. Either way, that's exactly why CleanStairs makes sense.

I didn't invent this design, but we were the first to really start wrapping it in decking, and we've turned it into a system: the same tough build, finished clean, with no exposed tread ends and no paint to keep up.

The CleanStairs builder manual is about 95% ready. Want on the list? Comment "STAIRS," "BUILDER GUIDE," or "MANUAL." 👇

Quote coming their way. 🔨

Address

Gig Harbor, WA
98329

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Telephone

+12535147554

Website

http://www.decksrxgigharbor.com/

Alerts

Be the first to know and let us send you an email when Decks Rx LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.