The Innovative Group

10/26/2026

Framing milestone in Niagara Falls!

👉Read the full post Here: https://theinnovativegroup.ca/project_updates/niagara-falls-addition-wall-framing-isobraced-air-update/

Our 500-square-foot rear addition is taking shape as exterior and interior walls go up. With the engineered LVL and wood I-joist floor system locked down, our carpentry team has framed the perimeter walls and installed a high-performance Canadian sheathing product: Isolofoam Isobraced Air+.

Why is this a game changer?

In conventional framing, wall studs act as "thermal bridges"—transferring outside winter cold straight through the walls and into the home. Isobraced Air+ integrates continuous rigid EPS insulation, structural OSB, and an engineered weather barrier all in one panel.

By running continuous insulation on the outside of the studs, we stop thermal bridging, eliminate drafts, and create an airtight building envelope designed specifically for cold Ontario winters.

Up next: setting engineered roof trusses and stick-framing the roof tie-in into the existing house to achieve full weather-tight lockup.

Stay tuned for more updates on this multi-generational build!

The Innovative Group
Messing Carpentry & Contracting Highland Hammer Carpentry Co.

10/22/2026

Floor framing complete in Niagara Falls!

Read the full post here 👉
https://theinnovativegroup.ca/project_updates/niagara-falls-home-addition-engineered-floor-framing-update/

Our 500-square-foot rear addition project just hit another big milestone. The entire engineered floor system is framed, glued, fastened, and ready for walls.

Because this in-law suite sits low to grade (~18" at the highest point) and needs a smooth, step-free entry into the existing house, ceiling heights and floor levels were critical. We engineered the floor deck using 11 7/8" deep, 3-ply LVL flush beams and matching 11 7/8" wood I-joists supplied by Taiga Building Products.

To top it off, we installed premium Weyerhaeuser 3/4" Edge Gold OSB subflooring. These panels feature built-in Down Pore drainage channels that route rainwater right off the deck during framing—preventing edge swelling and keeping the subfloor perfectly flat no matter what autumn weather hits us.

With a rock-solid, squeak-free floor platform locked in, wall framing is officially underway!

Stay tuned for the next update as walls go up!

The Innovative Group Messing Carpentry & ContractingMessing Carpentry & Contracting
Highland Hammer Carpentry Co.

10/18/2026

Lumber delivery day in Niagara Falls!

Read The Full Post Here 👉
https://theinnovativegroup.ca/project_updates/niagara-falls-addition-framing-lumber-isoair-brace-update/

Our 500-square-foot rear addition project is moving right into the framing phase. With the custom-welded helical pier foundation fully prepped, the framing lumber package and high-performance wall sheathing have arrived on site.

For this build, we are excited to work with a great Canadian-made product: Isolofoam Isobraced Air+.

Why does this matter? Standard home additions often rely on separate house wraps and foam layers. Isobraced Air+ combines rigid EPS insulation, structural OSB, and an integrated weather-resistant air barrier into a single composite panel.

By placing continuous insulation directly over the wall studs, we eliminate thermal bridging—keeping this multi-generational suite warm, cozy, and energy-efficient during cold Niagara winters, while drastically reducing air leakage.

Next up: setting the 3-ply LVL main beams, laying down the engineered wood I-joist floor system, and raising the exterior walls.

Stay tuned as framing gets underway!

Messing Carpentry & Contracting

10/14/2026

Exciting progress in Niagara Falls!

Read The Full Post here 👉

https://theinnovativegroup.ca/project_updates/niagara-falls-home-addition-helical-piers-foundation-update/

We are officially underway on a new 500-square-foot rear home addition designed as an accessible in-law suite for our clients' parents. This single-story space will feature a dedicated bedroom, a barrier-free shower, and a kitchenette.

Today’s milestone update focuses on the foundation: the installation of heavy-duty helical piers. Because the addition sits low to the ground (about 18" off grade at its highest point) and supports a heavy floor load carried by 3-ply LVL engineered beams, standard adjustable top piers couldn't handle the weight requirement.

Instead, each pier shaft was driven deep to proper torque, cut to exact laser elevation, and finished with heavy steel top plates welded directly on site. This custom detail ensures complete structural rigidity and zero long-term settlement.

With the foundation locked in place, we are rolling straight into setting the main LVL beams and framing the engineered wood I-joist floor system.

Stay tuned as this multi-generational build comes together!

09/03/2026

Exterior finishes are powering forward at our active home addition project in St. Catharines! 🏡🛠️✨

👉 Check ou the full update here: https://theinnovativegroup.ca/project_updates/st-catharines-home-addition-siding-railing-update/

Jaiden and the expert crew from Step Above Exteriors are back on-site wrapping up the final cladding and architectural metal details on our rear addition. The team is installing the remaining panels of premium Maibec CanExel engineered composite siding, paired with a matching all-white aluminum package—including soffit, fascia, eavestroughs, and downspouts.

To top it all off, work has officially begun on installing custom white aluminum deck railings on the outdoor platform!

Why is this phase so critical for long-term performance? Mounting exterior deck railings isn't just about screwing metal to siding—it requires heavy structural wood blocking behind the walls so the guards handle code-required guard loads safely. Every fastener pe*******on is carefully flashed and sealed against our weather barrier, ensuring wind-driven rain can't sneak into the wall cavity.

By pairing engineered composite siding with matching heavy-gauge aluminum rooflines and railings, our clients get a crisp, seamless look with incredible durability against Niagara weather.

With the exterior shell almost completely wrapped up, we are getting ready to step inside for interior trim, doors, and baseboards!

Step Above Exteriors

Track an active home addition in St. Catharines as Step Above Exteriors completes Maibec CanExel siding, aluminum perimeters, and deck railing.

08/08/2026

Drywall finishing is officially complete at our active home addition project in St. Catharines! 💥🎉

👉 Check ou the full update here: https://theinnovativegroup.ca/project_updates/st-catharines-home-addition-drywall-complete-priming/

Our interior spaces have taken a massive leap forward this week. Sabrina from Boardboss Drywall has wrapped up the final mudding and taping sequences, doing an incredible job building out smooth, flat surfaces across our new perimeter walls and expansive vaulted ceilings.

With the compounding coats completely cured, the team executed a thorough site cleanup to eliminate all gypsum dust and clear the floor plates. Now, we are moving straight into interior wall priming! 🖌️🏠

Why is a dedicated priming stage so critical? Raw drywall paper and dried joint compound absorb paint at totally different rates. Skipping a high-quality primer coat leads to a defect called "joint flashing," where you can actually see the taped seams telegraphing through the final paint. By applying a specialized primer sealer first, we equalize the suction across the entire wall, guaranteeing a flawless, uniform finish when the final colors are rolled on.

Now that the building envelope is weather-tight, insulated, and beautifully boarded, our finish carpenters are getting ready to step in next to install doors, baseboards, and customized window trim.

Board Boss Drywall Inc.

08/07/2026

Exterior finishes are officially underway at our active home addition project in St. Catharines! 🏡🕊️

👉 Check ou the full update here: https://theinnovativegroup.ca/project_updates/st-catharines-home-addition-exterior-siding-aluminum/

We are moving closer to full building enclosure as the specialized crew from Step Above Exteriors returns to the site to begin our custom architectural aluminum work.

Our clients have chosen a clean, monochromatic all-white facade design framework. This phase involves installing the primary exterior siding along with a matching white aluminum soffit, fascia, seamless eavestroughs, and downspouts. This entire roofline drainage package is engineered to integrate flawlessly with the newly installed custom extruded white aluminum windows from HELT Windows and Doors.

Why does this phase matter? Coordinated exterior trim isn't just about clean sightlines. Heavy-gauge aluminum roofline perimeters protect our eaves from wind-driven moisture, manage water diversion safely away from the foundation, and maintain the vital airflow ventilation our attic needs. By matching aluminum trim with our aluminum window profiles, we ensure compatible thermal performance—meaning no warping, bucking, or loose tracks during intense seasonal climate changes.

Next up: completing the exterior cladding details before turning our focus entirely inside for the final drywall mud, tape, and trim stages!

Step Above Exteriors

08/06/2026

Progress continues at our active home addition project in St. Catharines as the interior spaces take shape! 🏠✨

👉 Check ou the full update here: https://theinnovativegroup.ca/project_updates/st-catharines-home-addition-drywall-taping-update/

Now that the drywall boarding phase is officially complete, we have transitioned straight into mudding and taping. We welcomed Sabrina from Boardboss Drywall back to the site this week to begin building out our interior surfaces.

Drywall finishing during a hot and humid July in the Niagara Region requires a serious amount of skill and a deep understanding of building science. High humidity changes how joint compounds dry, meaning things have to be carefully monitored to avoid joint bubbling or shrinkage cracks. Sabrina is doing an incredible job navigating the heat, systematically embedding the structural tape, and layering progressive coats of joint compound to establish completely flat surfaces across our walls and beautiful vaulted ceilings.

Pacing this stage correctly ensures that our joints form a permanent, flawless bond that won't shift or crack down the road. It’s all about creating lasting structural integrity before the final paint goes on!

Up next: wrapping up the final skim coats, followed by fine sanding and a full application of high-performance interior primer.

Planning a residential extension or major interior alteration in Niagara? Building with absolute predictability means prioritizing expert craftsmanship behind the finished walls. Head over to our website to check out our residential addition timeline tools!

Board Boss Drywall Inc.

07/30/2026

The interior transformation is officially underway at our active home addition project in St. Catharines! 🏠📐✨

👉 Check ou the full update here:

https://theinnovativegroup.ca/project_updates/st-catharines-home-addition-drywall-leveling-update/

Our framing, roofing, and insulation systems have all been cleared by the city, meaning it is time to close up the walls. This week, we welcomed the expert crew from Boardboss Drywall to the site to begin hanging the interior gypsum boarding.

Erecting a footprint extension means seamlessly blending a brand-new engineered truss system with a legacy home's existing ceiling lines. To guarantee an ultra-flat ceiling plane across both spaces, the team is installing metal resilient channels perpendicular to the underside of the wood trusses before hanging any drywall.

Why does this step matter? Wood trusses naturally expand, contract, and move under heavy snow loads and changing seasons. If you screw drywall directly into the wood framing, that movement leads to popped screws and cracked joints over time. By using resilient channels, we decouple the drywall from the wood skeleton, absorbing framing movements and ensuring the finished ceiling remains flat, quiet, and completely crack-free for decades.

It is these hidden quality control steps that protect our clients' final investments and create lasting structural value behind the paint!

Up next: our drywall team transitions into the multi-step tape, mud, and sanding phases to get these vaulted ceilings ready for primer. Stay tuned for more updates as this space comes together!

07/22/2026

More progress from the field at our active home addition project in St. Catharines! 🌡️🔨💨

👉 Check ou the full update here: https://theinnovativegroup.ca/project_updates/st-catharines-home-addition-custom-glazing-enclosure/

Talk about dedication—after battling intense 40° heat yesterday to successfully anchor and level our heavy extruded aluminum window frames, the specialized crew from HELT Windows and Doors is back on-site today to finish the job.

Today's focus is all about high-precision glazing. The team is actively installing the massive, custom-manufactured glass panels shipped directly from Montreal. These aren't your typical off-the-shelf windows; they are heavy, high-efficiency architectural units designed specifically for this layout to provide maximum natural light without sacrificing thermal performance.

Handling oversized glass panels requires extreme care, especially during summer heat spikes. Our carpentry crew has carefully verified every rough opening to ensure perfect structural tolerances, allowing the glazing team to slide the massive panels into position, set the heavy-duty perimeter seals, and secure a completely airtight fit.

Getting these beautiful German-engineered frames and Montreal-manufactured glass panels locked down brings us one massive step closer to full exterior shell lock-up. We can't thank the installation team enough for crushing this milestone despite the crazy weather!

Up next: wrapping up the final seals on these exterior openings before our siding specialists mobilize to install the premium engineered composite cladding panels.

Thinking about adding large-format architectural glass features to your home? True project certainty comes from detailed engineering and a crew that never stops. Head over to our website to explore our structural addition processes!